Λάδι μηχανής Motul 300V 4T Off Road 15W/60 1lt

Motul 300V 4T Factory Libe Off Road

MOTUL 300V Factory Line Off Road 15W60 is a high-performance engine oil based on E technology specially developed for racing motorcycles with 4-stroke engines, which are designed to operate at a high viscosity, for use in the field of MX, enduro etc. Ideally suited for demanding motorcycle and quad engines in the off-road area.

SPECIFICATIONS/STANDARDS:
STANDARDS: Exceeds the requirements of JASO & API
JASO T903 Annex A (JASO MA friction value requirements).

E TECHNOLOGY:
For several decades, MOTUL has been developing high-performance engine oils based on synthetic esters. The special selection of synthetic esters and combination with an innovative additive package form an extraordinary synergy. E is the latest technological development stage and allows maximum engine power output without compromising reliability and wear.

ADVANTAGES:
- Max. Oil film stability, optimum adhesion, high temperature resistance for optimum wear protection.
- Low traction coefficient of E Technology reduces friction losses and improves maximum available torque by up to 2.5%.
- E Technology combined with the additive package improves shear strength, wear protection and engine and transmission life. This is documented with the outstanding FZG (Forschungsstelle fur Zahnrader und Getriebebau) test result of >14 FLS (Failure Load Stage). The smaller the value e.g. 1 FLS the lower the wear protection, the higher the value e.g. >14 FLS the better the wear protection of the gearbox. This test can be used to determine whether an adequate lubricant film thickness between the gears ensures reliable operation of the gearbox.
- Very high pressure absorption capacity guarantees maximum lubrication reliability even in extreme temperature ranges.
- Perfectly fast engine response even during rapid load changes.
- Improved clutch behavior enables optimum traction even in difficult terrain such as sand, snow, mud.
- High viscosity 15W60 compensates for the entry of unburned fuel and allows smooth shifting at high operating temperatures.

RECOMMENDATIONS AND NOTES:
Change interval as specified by vehicle manufacturer/tuner or adjusted according to operating conditions. Before use, always observe the service documents and recommendations of the manufacturer/tuner! Mixing with other synthetic or mineral lubricants is possible, but not recommended for optimum performance.

PROPERTIES:
color (visual) yellowish-green fluorescent
viscosity SAE J 300 15W-60
density at 20°C ASTM D 1298 0.872
viscosity at 100°C ASTM D 445 23.5 mm²/s
Viscosity at 40°C ASTM D 445 154.2 mm²/s
Viscosity index ASTM D 2270 186
Pour point ASTM D 97 -36°C
Flash point ASTM D 92 232°C
TBN ASTM D 2896 8.4 mg KOH/g